In a Lytzen pyrolysis oven plastic residues in nozzels or similar tools, used in the plastic processing industry, are removed by means of a pyrolysis process.
The Lytzen pyrolysis oven consist of a burn-off chamber and an afterburner unit.
The top part of the burn-off chamber opens pneumatically, and inside the chamber a grating is fitted for the placing of nozzels/tools. The chamber is electrically heated for a temperature up to 700° C.
The burn-off chamber can be adjusted in the working lenght according to our customers requirements.
The afterburner is gas heated by means of a gasburner, which is placed in the buttom of the afterburner. The afterburner can be placed on either the left or the right side of the burn-off chamber, which also applies for the control board.
In the pyrolysis process the gas, which is released in the burn-off chamber, is led into the afterburner and burned off.
The melted plastic material flows down into a cistern mounted underneath the chamber, and congeal into a hard mass, which is easily removed.
The Lytzen pyrolysis oven is designed to produce an enviromentally combustion of plastic material and to meet all present regulations from the authorities regarding clean outlet air.