Optimized cycle
The cycle of a Lytzen Depyrogenation oven is of course fully automatic.
Drying
The cycle starts with the drying phase where the damper on the exhaust is open ensuring, that any moisture will be removed from the chamber.
Heating
At a set-point temperature decided by the customer, the damper will close and the temperature will rise to the sterilizing set-point temperature as fast as possible. The damper will also stay closed during sterilization.
Lytzen ovens are always equipped with a power-ful heating element to shorten the heating time
Because of our superior filter suspension system we do not need to ramp during heating and cooling, but can go with full speed to shorten the cycle time.
Sterilizing
The sterilizing timer can be started either by delay timer or/and load sensors. If load sensors are chosen, the sterilizing timer will only be running if all the load sensors are within an acceptable range from the sterilizing set-point.
Cooling
If the cycle time is important, forced air cooling or water cooling is available for rapid cooling.
